3R ComfortGard cab

John Deere ComfortGard cab tractors are some of the most comfortable, quiet, and easy-to-use cab tractors available anywhere. This premium solution was developed using extensive customer research and validation tools, and some of the most advanced design techniques available.

The following ComfortGard cab tractor models are available:

3033R Tractor with hydrostatic transmission (HST)
3039R Tractor with HST
3046R Tractor with HST

Cab tractors are designed for those operators who demand superior performance.

Large-property owners
Commercial operators
Governmental agencies
Farmers

Whether doing loader work, front implement work (such as snow removal), mowing, tilling, rotary cutting, or light hay work, the cab tractors have the versatility and muscle to get the job done, all while protecting the operator from the elements.

Design

State-of-the-art design

State-of-the-art design

Designed by John Deere and built at the John Deere factory in Ramos, Mexico
Certified to the highest safety standards in the industry
Fingertip controls and an automotive-like fit and finish

Operators are sure to appreciate what this cab has to offer — beginning with an isolated cab. These cabs are designed with robust mounting points integrated into the rollover protective structure (ROPS) with a unique offset mounting design that provides an ultra-quiet ride.

The four-post ROPS design, carefully laid-out interior, and fuel tank located under the left rear side of the operator's platform provide a full 360 degrees of visibility.

Operators enjoy a commanding view no matter what task is being performed.
The raised header bar design allows operators — whether short or tall — to see the loader bucket or pallet forks through virtually the full range of operation.
Operator fatigue caused by awkward bending is reduced, leading to increased overall productivity.
The slow-moving vehicle (SMV) sign can be easily removed and stored in the operator's manual holder to provide a clear and unobstructed view for attaching to implements and doing field work.
The ample headroom and curved glass on all four sides provide a spacious interior and give operators the feel of a large tractor cab.

Operators are well-protected from the elements with a high-performance climate-control system providing heating and air conditioning.

The climate-controlled cab makes any task more enjoyable whether on a frigid winter day or a hot summer day.
The cab is completely sealed and pressurized to further protect the operator from the elements.
A standard high-efficiency clean-air filter keeps even the smallest dust and allergen particles out.

Cab comfort features

Superior operator comfort and visibility

Superior operator comfort and visibility

Optional radio kit

Several features are integrated into the design of the cab that deliver superior operator comfort and visibility. These features include:

Ultra-quiet interior
Four-post ROPS with curved glass for 360-degree visibility and spacious interior
Improved climate-control system for maximum operator comfort
Raised header bar for maximum loader visibility
Right-hand control center with the most frequently used controls at the operator's fingertips
Left-hand automotive-style park brake
Dash-mounted four-wheel drive (4WD) engagement, no awkward bending
Tilt steering
Improved shift range linkage for ease in operation
Flat unobstructed foot platform
Deluxe cloth seat with a retractable seat belt and armrests for excellent back support
Factory-installed deluxe air-ride seat with an adjustable backrest and adjustable armrests (available on the 3039R and 3046R)
Inside rearview mirror for rear visibility
Optional dual exterior rearview mirrors for added rear visibility
Ergonomically placed integrated loader joystick control for maximum comfort during operation
Interior dome light with on, door, and off positions for illumination in low-light conditions
Optional factory or field-installed Jensen® stereo with AM/FM, weatherband, and powered USB port
- SiriusXM® satellite radio ready and iPod® mobile digital device ready
- SWJHD1630 stereo can be ordered separately through Parts
Standard sun visor to block unwanted sunlight
Creature comforts like:
- Dual cup holders
- 12-V power supply
- Cell phone storage
- Hitch pin storage
- Miscellaneous storage
- Operator's manual holder
Integrated handle providing support for ingress and egress
Left-side step for convenient ingress and egress

Cab operating features

Right-hand control panel

Side-post mounting bosses

Optional air-suspension seat

Air-suspension seat

Two air-ride seat options are possible in 3R cab models. Both utilize the same suspension, which is designed to provide an air cushion for vertical-seat travel. This provides maximum operator comfort in any terrain. The two options are:

1. The optional factory-installed air-ride seat with a deluxe cloth two-piece seat with adjustable backrest and integrated armrests (for the 3039R and 3046R only).

Seat features:

Push the button at the base of the seat to pump up the seat. Pull the button to deflate the seat.
The seat slides fore/aft with a lever on the right-hand side of the seat.
The seat back reclines with a lever in the lower left corner of seat cushion.
Upper backrest extension available as a field installed option.

2. The optional field-installed air suspension kit that requires the existing standard seat to be re-used when installed.

NOTE: The deluxe two-piece seat top can be ordered through Parts for customers who desire it.

Key benefits include:

Maximum ride comfort and quality, thus minimizing operator fatigue
Dampens lower frequency vibration better than mechanical suspensions
Operator weight capacity of 330 lb
Enhanced appearance with the close-out boot

Lighting equipment

The base lighting package for cab tractors includes:

Two wide-angle halogen headlights
Two roof-mounted, adjustable halogen forward work lights, illuminating the work area in nighttime or low-light conditions
Two front and two rear amber turn signals/warning lights integrated into the cab roof
Two taillights integrated into the fenders
Three-position (on/off/auto) interior dome light

Optional lighting

Optional lighting

Installing rear window removable plug

Rear window removable plug installed

Pre-wired for optional accessories like a radio, horn, rear work lights, electric hydraulic diverter, rear wiper/washer, beacon light, and 12-V outlet
Integrated warning lights/turn signals and taillights, protected from trees and branches
Integrated roof-mounted antenna, protected from potential damage from trees and branches
Dual roof-mounted forward work lights for optimum forward visibility at night
Standard two-speed front windshield wiper to keep the front glass clear
Optional rear wiper/washer to keep the rear glass clear
Optional front fenders to protect the front cab glass from mud and debris
Optional rear fender extensions to help protect doors from mud and debris
High-impact polymer fenders, dent resistant and painted to an automotive-like finish
Rear glass that swings out 70 degrees for ventilation or access to the optional iMatch™ hitch
Easy access to route and mount a controller or monitor through the rear window removable plug and mounting bosses on the side post
Large, 48.6-L (12.8-gal.) fuel tank for longer operation without re-fueling
Left rear fender fuel fill with large opening for easy re-fueling
Fuel tank located under the left side of the operator's station for maximum rear visibility

Cab safety features

ROPS — Certified to the highest industry standards for maximum operator protection
Operator presence system
Engine shuts down if the operator leaves the seat when the transmission, mid, or rear PTO is engaged
Tractor must be in neutral and the park brake fully set for stationary PTO work
Right-side emergency exit
Tempered safety glass in case of breakage
Roof-mounted warning lights/turn signals for road transport — two front and two rear
Two fender-mounted taillights
Easily remove the slow-moving vehicle sign and store it in the operator's manual holder

Deluxe cloth seat

A deluxe cloth seat with retractable seat belt is in base cab equipment.

An ergonomically sculpted seat cushion, an adjustable scissor-link suspension, and seat armrests are combined to provide excellent operator comfort and support.
The scissor-link suspension can be adjusted for the operator's height and weight.
The operator weight adjustment adjusts to the operator's weight (52 kg to 125 kg [115 lb to 275 lb]).
Using a lever located under the seat, the seat is adjustable fore and aft for operator height.
Retractable seat belts prevent belts from becoming tangled in the seat suspension and controls.
Optional air-suspension seat is available.

Optional lighting includes:

Dual roof-mounted adjustable rear work lights
Rotating beacon light

Jensen is a trademark of ASA Electronics Corporation. iPod is a trademark of Apple Inc. SiriusXM is a trademark of Sirius XM Radio Inc.

3039R Compact Utility Tractor