Bedknife

The SL Walk-Behind Greens Mowers feature a large selection of quality bedknives for mowing any area on the golf course, including greens, tees, approaches, collars, aprons, and fairways.

The harder the steel in a bedknife, the longer it maintains an edge. However, a harder steel is also more brittle, making the bedknife more susceptible to damage. A steel that is too soft wears quickly, but is less prone to breaking.

The John Deere bedknife line represents a strength compromise. Special alloys ensure bedknives are tough and resistant to damage over time, without sacrificing the life of the edge.

18-in. (45.72 cm) bedknives for the 180SL

Description	Bedknife part number	Minimum height of cut
18-in. tournament	MT4846	0.098 in. (2.5 mm)
18-in. ultra-low-cut tournament	MT7350	0.078 in. (2 mm)

22-in. (55.88 cm) bedknives for the 220SL

Description	Bedknife part number	Minimum height of cut
22-in. bedknife	ET17533	0.126 in. (3.2 mm)
22-in. tournament	ET17534	0.098 in. (2.5 mm)
22-in. long-life fairway	ET17532	0.189 in. (4.8 mm)
22-in. high-cut fairway	ET17767	0.299 in. (7.6 mm)
22-in. ultra-low-cut tournament	MT7351	0.079 in. (2.0 mm)
22-in. tournament with hardened insert	ET11066	0.126 in. (3.2 mm)

26-in. (66.04 cm) bedknives for the 260SL

Description	Bedknife part number	Minimum height of cut
26-in. bedknife	MT6947	0.126 in. (3.2 mm)
26-in. long-life fairway	MT6946	0.189 in. (4.8 mm)

260 SL PrecisionCut™ Walk Greens Mower